Petrol Fuel Line System Cleaner
TEC 2000 Petrol Fuel Line System Cleaner Cleans Injectors & Entire Fuel System by removing any moisture build-up in the fuel tank and its strengthened solvent package, cleans injectors and injector nozzles, thereby improving the atomisation and spray pattern of the injected fuel.
The product improves combustion and fuel efficiency and helps to reduce the effects of water build-up.
The high concentration of the sophisticated additive package, will clean up areas such as valve and piston deposits, lambda sensors and catalytic exhaust converters, after combustion.
Water build up can cause “phase separation” of the octane boosters in modern lead free fuels and this will affect the power output and running characteristics of the vehicle.
This Product Is Added to The Tank & Can be used in Injected or Carberated Vehicles
When used regularly, (2 or more times per year) the composition of TEC-2000 Fuel System Cleaner - Tank Additive helps reduce any moisture build up in the fuel system, helps clean away upper cylinder deposits and deposits on valves and valve stems and prevent partial blocking of injectors.
How To Use TEC 2000 Petrol Fuel Line System Cleaner
Add One Tin of TEC 2000 Petrol Fuel Line System Cleaner to your fuel tank twice a year to keep your fuel system clean
In extreme cases two tins can be added.
In Any case please make sure your tank is at least 1/2 full before adding this product
ANOTHER USE FOR PETROL FUEL INJECTOR CLEANER:
Automotive Technicians report to us, that OIL in cooling systems can most ably be removed by using the above product instead of a Radiator Flush.
Our view
As FUEL INJECTOR CLEANER is water miscible, it will mix with water and form a powerful solvent mix which will rapidly dissolve and remove oil residues.
The product was not originally designed with this application in view, but practical usage has shown that it performs this task very well indeed.
In terms of the effect, most radiator flush is designed to remove rust, scale and lime deposits.
Generally radiator flushes do not work very well on oil.
There are some “caustic” variants on the market which would help to remove oil, but the feed-back from mechanics has been that nothing works as well as PETROL FUEL INJECTOR CLEANER.
They report that when confronted by oil in the cooling system, they use it in the cooling system as directed for our RADIATOR FLUSH and have obtained excellent results.
We would agree that if it is to be used, this would be the way
Add a full tin of Petrol FUEL INJECTOR CLEANER to a warm (NOT HOT) radiator.
Move heater control to “Hot”. Start and run Engine for 15-20 minutes.
Drain and flush well with clean water.
We Recomend that you fill run and flush the system at least 3 times
Refill Cooling system according to manufacturers’ specifications, including anti-freeze as directed.
IMPORTANT PLEASE READ
We note as a caution that the chemistry of the fuel injector cleaner is likely to attack rubber hosing.
Therefore if it is left in the cooling system for longer than 20 minutes or is not properly flushed out, damage to the piping could result.
